My exhaust!!!!!

[Matt_08]

hey guys,

MY exhaust has some thing inside of it which is lyk a plate with drilled wholes inside of it, Do i need it or can i just take it out ??????

 

[motoXXX]

some bike are better running without it and some run like **** without it so take it out and give it ago

 

[146cc_outlaw]

you can take it out and you will have to take all the packing out to but it will make your bike a s*#t loads louder and you might loose some bottom end power but you might also get some more top end power its up to you me well i like mine packed for racing just so i stay under the DB limit and so the cops in the bush dont give me any trouble

 

[ASR Rider]

thats the restricter, they are about 55% open, i replaced mine with 75% stretched mesh just roll till it fits and tack the ends

 

[Matt_08]

ok but theres one problem now that ive taken it out it has abosolutly no packing, and now its just pretty much some metal tubein with the gold end lol. so i shuld just leave it in.


thnx

 

[crazzy #1]

dont pull the packing out or the baffle itself... your bike will sound hell ****

 

[ASR Rider]

all mufflers have packing man unless u got ripped it will look little fibre glass particals

 

[M@rkay]

your bike will sound a **** load louder. done it to a 650cc quad. to load man. but sounds awesome. love it. gave heaps more power too.

 

[ASR Rider]

what u do markay change baffles ect?

 

[M@rkay]

well pretty much its now a straight pipe through. the muffler was cut in half and the spark arrestor was removed. i think like the mesh (baffles i think) **** was removed and a thin layer was reapplied. the quad goes amazing now because of all these mods man. i dont know if it will make a difference to ur minibikes though. But i put a silencer like thing on my pitbike when i ride around in my driveway and it doesnt really affect the performance. ull have to test it urself.

 

[Matt_08]

all mufflers have packing man unless u got ripped it will look little fibre glass particals

probably that wouldnt surprise me !!!!!

 

[146cc_outlaw]

hey mate this is your best bet so try this on your exhaust i did and its works and its cheap

http://www.miniriders.com.au/forum/mini-tutorials/15004-how-repack-exhaust.html

 

[Matt_08]

hey mate this is your best bet so try this on your exhaust i did and its works and its cheap

http://www.miniriders.com.au/forum/mini-tutorials/15004-how-repack-exhaust.html

i might actually do that thanx mate !!!!!!!

 

[Matt_08]

hey again,

any1 know what that mesh or whatever it is in the exhaust pipe is and where i'd be able to get it. Because im going to "TRY" and pack my muffler....

lol thanx

 

[foolsp33d]

isnt it a fibreglass composite?? back in the day steel wool was used as a baffle to.. might have been produced a bit better back then though..(i hold NO responsibility if you pack it with steel wool and cause firworks and sparks to shoot out your exhaust!)

this stuff would be sweet to use...

Superwool Product Information, Data Sheet and MSDS Links

 

[motoXXX]

^^^ lol hahaha