Need cradle mount! C'mon!!!

[unit_mx]

Bolt came loose on my engine top mount , ripped clean off my left hand engine mount ( Now being welded back on ). But I loose out on strenght big time , not a big fan of pulling down the donk to replace the left crank case so a cradle is my best bet.

Now Im aware that everyone runs cat5 cradle's or the brandxmini's units. Just checked the exchange rate on the brandxmini unit for $57.40 USD + $20 USD shipping = $117 Aus. Not too keen on paying that much for a cradle considering its half of what a second hand billetware frame is worth.

So , just putting this out there to anyone who has made a cradle mount. I will give you my hard earned cash for a decent cradle to be made up. I can easily get it welded to my frame but all I need is just the cradle!

I can do custom graphic kits for your cradle , preety good deal mybe? Or cash if preffered

Let me know please , I need some cradle

Love
Louis

 

[SGONE]

i could fab ya up a cradle that can be welded straight to ya frame no worries..
i'm making 1 for my stocka at the moment,just working on the templates and getting all to fit nice and flush

 

[themountain]

yeah...cost 10 bucks for the sheet metal and a pack of beer for the welder...here you go...not cute but after 2 years still alive!!!
ImageShack - Image Hosting :: pic0062rn0.jpg
ImageShack - Image Hosting :: pic0063ib0.jpg
ImageShack - Image Hosting :: pic0064of6.jpg

 

[SEDUCE]

i have a cradle mount frame here for sale $60
it is off a FMR 08 model

 

[I_THUMP]

I think realmenride50s had an easy to make cradle mount. I just found the thread and the pics didnt come up but it seems to be a good option that does the trick. Heres the link http://www.miniriders.com.au/mini-chat/18532-how-u-reforce-your-frame.html

 

[//BRAD\\]

ill make it for custom backgrounds for my crf with 281 on them, sound good? and sagaone i dont know how you would get the engine out with the cradle welded in as it has to drop down a bit to get past the top engine mount thats why mine are bolt in and with billetware frames the top mount unbolts. ill make a jig up so i can make a few while im at it.

 

[mini mullisha]

hey i might be up for a set of custom #plates or 2? if ya keen and wont bit extra cash??
Pm me a rough price a set.

 

[SGONE]

ill make it for custom backgrounds for my crf with 281 on them, sound good? and sagaone i dont know how you would get the engine out with the cradle welded in as it has to drop down a bit to get past the top engine mount thats why mine are bolt in and with billetware frames the top mount unbolts. ill make a jig up so i can make a few while im at it.

very good point never thought of that. the 1 i'm making at the moment is a bolt up job so i guess it will have to stay that way..

 

[unit_mx]

ill make it for custom backgrounds for my crf with 281 on them, sound good? and sagaone i dont know how you would get the engine out with the cradle welded in as it has to drop down a bit to get past the top engine mount thats why mine are bolt in and with billetware frames the top mount unbolts. ill make a jig up so i can make a few while im at it.

Sounds good if you include the spacer & bolts?

You got an email so I can send you the drafts for the numberboards?

Bretto , I'll have a word to my boss now about it

 

[//BRAD\\]

yeah mate all mounting hardware is included my email is [email protected]

 

[unit_mx]

BUMPPPPPPPPPPPP

Need cradle!