Perimeter Midsize Build

[crf338]

how tight is the clamp? I found when the clamp was done up excessively tight it pushes itself and the filter off, so I tightened it enough to hold on for a few hours and progressively tightened it maybe twice / three times before I went riding

 

[tubes-DHZ140]

When I put my OKO on my DHZ it did that, i just put the metal clip thing right at the edge of the rubber on the filter and got a mate to make sure it didn't slip off, it was oily also. You'll get it sooner or later tho..

 

[fusedminis]

Few update photos,

Just need these blasted oil cooler lines...

 

[The Pro352]

hay man looks absolutely sik :rockon:

 

[J3NNINGS_024]

looks bloody awesome mate, definetly jealous of the zorst man:congrats:

 

[The Pro352]

were did you get your graphics

 

[fusedminis]

Yeh got heaps lucky with the exhaust, got it for a steal too.

The graphics are from ebay, still trying to get them to behave, as the klx plastics have quite a few bumps and lumps that you have to mould them around.

 

[crf50 2008]

:action-smiley-033: "congratulations" nice build :action-smiley-033:

 

[LUKE123]

nice bike mate, can you please send a link for the bash plate? thanks luke

 

[fusedminis]

The bash plate is one off a klx110, just a stock one that I cut and rewelded so it would fit, I had to bend it here and there and also cut out the drain plug hole as well as make a few clearance cuts, but all of that minus the welding is very easy.

Thanks for the praise, I still am yet to tune it but then it will be finished.

 

[sam93]

Where did you get your fuel line from?

 

[fusedminis]

Got the fuel line from ebay, its just some green karting line

 

[viper sx]

bet ya can't wait to get your oil cooler lines mate, she'll go like a beast on roids.

i like how you made your bike look good as and added a a lot of bling.
i know it's not everything but its always good to have a bike that looks beasty and is beasty.

anyways, love the bike.
top job mate.

 

[fusedminis]

I have gotten the oil lines, and I still had to mod them to fit, but the bike is ready to go short of a tune. I am waiting on some jets and then I should be set. HOPEFULLY, touch wood.

 

[viper sx]

yeah, hahaha sorry i didn't know you got the oil lines

 

[fusedminis]

Finally got the jetting dialled (thanks for the jets Sean, major help)

I really need to change the rear sprocket for a smaller one, I was short shifting through the gears, 3rd and 4th were the only usuable ones, and man doesnt this engine just want to rev...

 

[Carlts]

Nicely done man... good to finally ride it ey

 

[fusedminis]

Whats the correct way to wire in the kill switch on these 155z engines? I tried what I thought was correct and the kill switch doesnt shut down the engine.

 

[J3NNINGS_024]

Whats the correct way to wire in the kill switch on these 155z engines? I tried what I thought was correct and the kill switch doesnt shut down the engine.

doesnt it just have the plug thing that you plug the kill switch into?

 

[fusedminis]

I really cant remember will have to look into it tomorrow, anyhows its not working.