Pister Pro Swingarm??

[nicko451]

Just wondering if a pitsterpro swingarm will fit a pitpro 150XR? as im able to get a shock out of one pretty cheap!

 

[coolmodee01]

yeah it will mount up

the shock on the pitpro may be longer but will work fine

 

[nicko451]

ok cheers man! im taking it this would be a much stronger swingarm?

 

[I_THUMP]

ok cheers man! im taking it this would be a much stronger swingarm?

Probably but its still not unbreakable hahaha

 

[PIMP50]

That was actualy a manifactuar problem i would say i hav one and its strong no problem with it at all

 

[I_THUMP]

Yes they did replace that swinger free of charge and its the only one ive seen fail from memory.

 

[PIMP50]

it is still pritty good for a laugh tho

 

[wogtaz ryder]

That was actualy a manifactuar problem i would say i hav one and its strong no problem with it at all

Seen one snap clean in Half at Hri round 4

 

[Cactus Jack]

The pressed out shape in the side walls of those swingarms actually WEAKEN them against an upwards or downwards bending force ... as verified by the fact that it bent right where the pressing is ... They're there purely for cosmetic purposes at the expense of strength ... Flat walls are superior strength-wise ...

The way that swinger failed is actually a good thing in one way since the load was taken off the welded joints ... It's better from a safety stand point to have a gradual failure which gives the rider pre warning rather than a sudden total failure without warning ... Consider the pressed out tear shape as creating a deliberate ???? ... "Crumple Zone" ...

 

[nicko451]

haha i didnt see that pic! shattering that would have been! im thinking ill just wait to see how mine goes for now, we have been doing some decent size jumps and its been fine so far, ill see how i go!