Pit Bike

[dazza07]

dose any one know how to get a back wheel of as its a drum brake and the nuts just keep turning and its two diffrent types of nuts as shown in the pics below

 

[daniel40]

get a mate to hold the other side with a shifter or somthing and for next time post this in tech talk general chat is for non mini releated stuff.

 

[dazza07]

ok will post there next time its still turning when someone else is holding it ?

 

[daniel40]

make sure there turning the opposite way you are

 

[dazza07]

yes am doing that the full nut is turning at the oppiset end and when you get someone to hold it with anouthe rachet its still doing the same

 

[daniel40]

i dont get wat u mean??? u need to hold one end one turns one wya the othere turns the other way

 

[dazza07]

ave tryed that but it does not work

 

[daniel40]

so it just keeps turning?? even with one person holding it with a shifter and teh other turning it??

 

[stupidability]

hi i have a prox 138 .me and a mate were getting some mad air but my forks bottom out .some people say to put pressure in them but the bike shops say not to (valves are only for bleeding air out) what to do couse we are jumping on the weekend.

 

[Flarry]

Make sure the socket on the nut isnt too big and the nut isnt just turning inside it... isnt that common sence?

 

[cass38a]

Cut the sucker off with a Oxy.

 

[cass38a]

Off course you will need a new axel if you resort to this.

Put a spanner on each end of the axel, hold one still and turn the other one in a anti clockwise direction. If it dosent undo then the axel or nut is stripped anyway.

If this is the case a cold chisel or oxy is the way to go.

 

[Old Hoghead]

hold one end & belt the other real fast & real hard to break the thread bead. You need to thock the bolt ( I dont mean go BOO)