Slight leak from Sump drain bolt, Orion 125cc

[mjc85]

I just changed the oil from the chinese stuff in it to some Motorex 10/40.

After draining the oil, i put the bolt back in and did up about half way with my fngers and then finished it with a socket, it definately didn't cross thread because it was easily done up with my fingers. How can i stop this leak ?

 

[mjc85]

Oh and how do you adjust the rear brake, when i push the brake pedal down the pads hardly come into contact with the brake disc?

 

[Dilox-125cc]

hey Mjc85 your oil problem well if i was in that postion i would like get a little seal or a washer befor you put the bolt on and do it up Real tight if that didnt work id ethier take it to a shop or ask the guys here.

your brake problem i rember but no i cant sorry :lol: :cry: :cry:

 

[MiniMan07]

oil leak

hi, it sounds like you have taken the bolt out and the washer has fallen into the container that your draining it into.

 

[jayden-pitbikez]

this thread is like a year old

 

[darb110]

hahah LOL it is too =P well you wanna hope hes fixed his problems ROLF