UNI Filter

[tez]

What size UNI filter would I need to run on a 30mm Mikuni? My current filter is a stock one (42mm diameter)

 

[my67xr]

i thought the china 30mm Mikuni used a 42mm filter, same as the OKO's
http://www.ebay.com.au/itm/Carburet..._Parts_Accessories&hash=item25816a08e6&_uhb=1

 

[Phil67]

44mm I think. But just saw the post above, so I'd go with 42

 

[tez]

i thought the china 30mm Mikuni used a 42mm filter, same as the OKO's
http://www.ebay.com.au/itm/Carburet..._Parts_Accessories&hash=item25816a08e6&_uhb=1

You are correct it is a 42mm but what sizes are all the UNI filters? The sizing they give is talking about the angle? Would appreciate any online site that's selling a genuine UNI filter in size 42mm

 

[tez]

44mm I think. But just saw the post above, so I'd go with 42

Yeah ill go the 42, thanks mate

 

[my67xr]

ok, just found another 30mm, this one comes with as 48mm filter ?
http://www.ebay.com.au/itm/NEW-MIKU..._Parts_Accessories&hash=item230d69f595&_uhb=1

a 44mm i/d filter would fit too, it would compress a little.

have you measured your Mikuni?


these ones say 44mm angle, but 44mm id\s the i/d, and they are saying that the filter is angled,
so they arent meaning it's got a 44mm angled filter.
http://www.ebay.com.au/sch/i.html?_...ifilter+mikuni&_nkw=unifilter+mikuni&_sacat=0

 

[tez]

hmm because the one on mine now is a 42mm, so im not sure if i should go the same size or the 48mm?

but like you said it will compress, so i guess 44-48mm should be fine?

no not yet, just got the measurement of the current filter

ahh okay i understand now, is there any difference in performance between them at all?

http://www.motorbikecity.com.au/spare-parts/Filters?product_id=218

ok, just found another 30mm, this one comes with as 48mm filter ?
http://www.ebay.com.au/itm/NEW-MIKU..._Parts_Accessories&hash=item230d69f595&_uhb=1

a 44mm i/d filter would fit too, it would compress a little.

have you measured your Mikuni?


these ones say 44mm angle, but 44mm id\s the i/d, and they are saying that the filter is angled,
so they arent meaning it's got a 44mm angled filter.
http://www.ebay.com.au/sch/i.html?_...ifilter+mikuni&_nkw=unifilter+mikuni&_sacat=0

 

[my67xr]

i have a green 42mm? Uni Filter on my Atomik, i have heard someone say they are finer?
it was the only colour i could get at the time

 

[tez]

what size carb are you running 26mm? alright, i just need a new one because the stock ones a **** and maybe a new filter may help with the bogging?

i have a green 42mm? Uni Filter on my Atomik, i have heard someone say they are finer?
it was the only colour i could get at the time

 

[SwapperMX]

i have a green 42mm? Uni Filter on my Atomik, i have heard someone say they are finer?
it was the only colour i could get at the time

That's correct. The green filters are designed for off road use and much finer filtration. The red filters have a much coarser foam designed for more flow and suitable for road use.

 

[my67xr]

their web site doesn't actually say anything about fine and coarse
in fact it mentions available in red, green, blue or yellow.
http://www.uniflow.com.au/contents/media/Performance Catalogue 13.2 Web.pdf

 

[SwapperMX]

They are definitely different density foams. I have only ever seen the filters in the sizes that I use available in either green or red. Unsure about the other colour foams.

 

[tez]

their web site doesn't actually say anything about fine and coarse
in fact it mentions available in red, green, blue or yellow.
http://www.uniflow.com.au/contents/media/Performance Catalogue 13.2 Web.pdf

Got the 44mm UNI from DHZ plus a bottle of Torco engine oil

 

[Phil67]

I have red cause it matches.

 

[rotn50]

I have red cause it matches.

I also have red cause it matches

 

[my67xr]

I also have red cause it matches

what, matches the flames that come out of it ? lol

 

[rotn50]

To much horsepower to much fuel lol. And someone else was riding it when it flamed up costing me $30 for being a nice bloke kill kill kill