Video: Archerfield 24/01-2009

[user 11561]

Mini motard video from Archerfield 24/01-2009. Click on the little smiley face aka how I looked under the helmet ->

 

[jovian]

nice mate lapping aroung the 27 sec mark. hopefully i get my front brake sorted soon, just haven't had the time. wat gearing are you running? I was running the stock stuff and it just didn't suit the track.

 

[no_crf50_here]

15/41 i think he said, must be a real sweet gearbox because he had good pace down straight and didn't even sound like he was topping out .

 

[jovian]

what sprockets u got laying around for me?

 

[user 11561]

nice mate lapping aroung the 27 sec mark. hopefully i get my front brake sorted soon, just haven't had the time. wat gearing are you running? I was running the stock stuff and it just didn't suit the track.

15/41 is correct - stock is 16/41! I'll try next time to go down on 14/41 alternative 15/42!
Haven't even looked at my lap times....! 27sec you say...should be able to cut more of that! My rear wheel is not lining up with the frame so when that is sorted I should be quicker in the corners - in theory...! New carby and inner rotor kit should help to!
What lap time are you guys doing?

 

[jovian]

so wat gearing u reckon i should i run. I was gunna go 14/42.

I know my missus does aroun 29-30, pete around 23-24, i would be thinking i would run around in the 25-27 with shit gearing terrible suspension set up.

Have u done anything to yours to make it handle better? How much of the fork is above the clamp?

 

[Squeeby]

15/41 is correct - stock is 16/41! I'll try next time to go down on 14/41 alternative 15/42!
Haven't even looked at my lap times....! 27sec you say...should be able to cut more of that! My rear wheel is not lining up with the frame so when that is sorted I should be quicker in the corners - in theory...! New carby and inner rotor kit should help to!
What lap time are you guys doing?

I prefer 16/41 than 14/41. I have a 14 if you want to try it but I found the engine runs out of revs too quickly, nothing to spin almost.

 

[jovian]

with stock gearing i can only use the first 3 gears, i want more acceleration!!! i will double check my gearing and work out wat i need.

 

[user 11561]

so wat gearing u reckon i should i run. I was gunna go 14/42.

I know my missus does aroun 29-30, pete around 23-24, i would be thinking i would run around in the 25-27 with shit gearing terrible suspension set up.

Have u done anything to yours to make it handle better? How much of the fork is above the clamp?

Haven't played around with the shocks yet! I'm running Dunlop TT92 and they do a great job! My clamp is almost at the top but haven't ridden hard before the last two sesions last Saturday so will have to find "my" setting on that to!
I've ordered a T42 for the rear as I don't what to go to low on the front and loss the function of the chain support roller! I have also ordered a Mikuni VM24 and will mount the inner rotor kit so all my sprockets may have to me changed when that have been installed!

We should start a new Thread...think this one started out with a video haha