what carb size do you recomend for a lifan 125 and plastic moutning questions

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

swims350

New Member
Joined
Sep 4, 2016
Messages
4
Reaction score
0
What size carb would you reccomend using on a pit bike with a lifan 125cc, be all around use no racing, just figured since they are cheap I'd buy a new one.

Also how do your plastics mount? Mine mounted on the gas tank but the rest were just tied on the bike only.
 
The chinese mikuni 22/26mm is ok on the125s, just need a slightly bigger pilot jet the stock one.
Post some pics up of the frame and plastics, may have the wrong ones for your bike.....

Sent from my SM-T110 using Tapatalk
 











sory I took it all apart before I got pics of it, you can see the upper seat frame part is rigged up somebody stuck solid bar pieces in it. The seat bottom is broken all over with like no mounting at all, the plastics just like look any of the other generic ones you can buy on ebay or amazon.
 
It looks like a crf50 copy frame, you could weld some tabs and nuts to the subframe so the plastics will bolt on, or just cable tie them on. The carby you have should be fine, just needs a good clean out, a #18 or #20 pilot jet if it doesnt already have that size in it, a filter and a tune.

Sent from my SM-T110 using Tapatalk
 
Back
Top