Will She Fit

[TinyFennell]

Will this fit to my lifan 125 thought i should buy from the site sponser

http://www.ebay.com.au/itm/NEW-RED-...orcycle_Parts_Accessories&hash=item3a72c8a9e9

 

[my67xr]

it will only fit if you buy a new ignition cover to go with it.

one like this-
http://www.dhz.com.au/buy/hd-cutaway-ignition-cover-crf50/ENP-29


see the company names to the left of this post under heading ( Cool Sites) that is all the Sponsors' sites

 

[TinyFennell]

So that Will bolt straight up to my lifan 125

Sent from my GT-S7500T using Tapatalk 2

 

[my67xr]

the cutaway cover ? yeah it will bolt straight on too

i would make sure it is made of metal/alloy too if you can.
if your chain ever stretches and breaks, or jumps off the sprockets, it'll hit the stator cover and possibly damage the stator pickup at the back of the flywheel


you may find some cheap ones on ebay too ?
a specific Lifan embossed one, from UK though so 2 weeks in the post
http://www.ebay.com.au/itm/Pit-Bike..._Parts_Accessories&hash=item2c708d7103&_uhb=1

http://www.ebay.com.au/sch/i.html?_...+pit+bike&_nkw=stator+cover+pit+bike&_sacat=0



you could always cut it back yourself, a cheap way out of it.
buy the case saver first from DHZ,
take you cover off, then trim it back to suit it, use a 1mm cutting disc in an angle grinder, then deburr/sand smooth the edges etc and respray the cover

 

[TinyFennell]

Already making custom sub frame don't want to end up making a bike coz i can already making see it happening i dot mind buying

Sent from my GT-S7500T using Tapatalk 2