wiring loom with lights

[stomp150.gav]

hi can ne 1 help me im building a loom with lights.out ov the stator i got a pink wire a green/white a yellow a red/black and a red/white.on my cdi box i have a red/black a blue/white a green a black/yellow and black/white.i also have a reg/rec witch has green red white and yellow.i need help to join all of these wires together.i build engines but wen it comes to wiring id rather get some1 who nows what thay r talkin bout to tell me.thanks ppl

 

[timmonds]

Hi, i have been looking at this for a while. although due to other bike issues never tested it. i belive you need the yellow wires(there should be 2?) out of the engine are the ac and they connect to yellow rectifier/regulator. green should be the earth, and the red out of the regulator should be the +12v to charge or run lights.
hope this helps, see if anyone has corrections.. and sorry if its a little hard to understand, just woke up.
Tim.

 

[stomp150.gav]

lool i can understand you.its only got 1 yellow wire from the stator.theres a pink and green/white from the pick up.the rest yellow,red/black,red/white green/white come from the coils on the stator i c if i can upload a picture and exsplain a bit more.

 

[stomp150.gav]

sorry if there a bit big or the picture is not that good my camara is as **** as a choclate fire guard.

 

[stomp150.gav]

the ones coming from the cdi r green,red/black,blue/white,black/yellow,black/white

 

[timmonds]

hmm, sorry man, i fell asleep again lol. umm. what type of motor is it? hmm, when i was putting mine together, there was 2 yellow wires. have a look at this might help, but it sounds like something might be missing. the yellow and white are usually the ac output.

 

[timmonds]

yeah, the cdi wires are fine. its just the yellow wires, they usually stop at the wireing loom connection, and dont go to the cdi. im wondering weather it will work with just one yellow wire and the other not connected. im going to the beach house where my project bike is tomorrow so i can have a play around and test stuff. and post my results on sunday.

 

[stomp150.gav]

its a yx150 gen 2.ok mate if you could that would be helpfull.i can build engines all day long but when it comes to wiring im not so clever lol.thank you for your help tim