Yamaha banshee crank

[bansheefan14]

Heyy everyone I have a Yamaha banshee 350 twin 2 stroke quad bike and recently the crank bearings have stuffed up anyways I haven't been able to find anywhere around Brisbane that splits the banshee crank because the crank has 2 conrods on the crank. Has anyone else from around Brisbane ever rebuilt a banshee crank, if so how much did it cost and was it easy to get the right bearings?
Sent from my GT-S5360T using Tapatalk 2

 

[xLOCOx]

ive heard some many awesome things about banshees, but never seen one in the flesh!
here is the bearing... genuine yamaha... http://www.ebay.com.au/itm/like/180...e&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=107
a brand new crank thats been refurbished will run \you about 400 to 500 bucks!

i would go to your local yamaha joint and see what they think about rebuild.....
good luck!

 

[my67xr]

Crank bearings failed, or Rod/Big End bearings ?
if it's the big end, then you'll need the rods resized too.

i would be replacing the whole lot,
go for a Vito's Stroker kit , or a Stroker/Longer Rod kit if you can afford it.

http://www.ebay.com.au/itm/VITOS-Ya..._Parts_Accessories&hash=item3f2aabd539&_uhb=1
http://www.ebay.com.au/itm/VITOS-Ya..._Parts_Accessories&hash=item20d66a416c&_uhb=1

 

[zwebx]

any shop that can re-balance and pull apart one pc cranks can do it you just need to find a rod kit

 

[bansheefan14]

I ain't gonna bother rebuilding the old crank i'm going to get the vitos 115 MN stroker crank . I already have a fresh top end aswell might aswell get die nice ASV levers too!

Sent from my GT-S5360T using Tapatalk 2

 

[my67xr]

Vitos' gear is top quality stuff,
have you checked whether you need anything else to go with that kit ?

 

[bansheefan14]

yeah im getting a gasket a oil seal kit . there was already a 115mm strokes crank in my banshee so i already have the pistons (y) ( 3rides old)

Sent from my GT-S5360T using Tapatalk 2

 

[my67xr]

ahh, good work !