Yx 160 clutch

[Jonte]

Hello!

How tight i should tighten these four bolts? My clutch isn't working at this moment, even though i have tried to tighten the clutch cable. I believe that the problem is those bolts, that i have tightened them too tight?

 

[my67xr]

They don't get done up too tight, as they are only M6 bolt's
The torque setting for them is 45 inch pound's

Have you replaced the clutch recently ?
If so did you refit the thicker splined washer first, turn it 1/8 turn then fit the thin 3 pronged locking washer in that hold's the clutch basket to the gearbox properly?

 

[Jonte]

Problem solved, I had wrong kind clutch cable bracket.