yz 426f gearing

[Judge]

Hi just wanted to get some advice on gearing i want to make it abit easier to be able to wheelue it in second or third gear i think i need to go down in teeth on the cogs i think would anyone know wat sprockets to use or how to work it out pls help would be much appreciated thanks

 

[my67xr]

So you need to lower the gearing to make it easier to pop the front wheel up.
Easiest way is to use a smaller front sprocket, how many teeth is your front sprocket atm ?
Just read 14t is stock ?
You could go down to a 12t front and still should have adjustment left on your chain

 

[Judge]

So you need to lower the gearing to make it easier to pop the front wheel up.
Easiest way is to use a smaller front sprocket, how many teeth is your front sprocket atm ?
Just read 14t is stock ?
You could go down to a 12t front and still should have adjustment left on your chain

Would two teeth make a difference an the front sprocket is enough i thought maybe id have to do both

 

[my67xr]

Dropping 2 teeth on the front sprocket is equal to adding about 5 or 6 to the rear