zwebx Well-Known Member Joined Sep 3, 2012 Messages 3,296 Reaction score 16 Location Melbourne Apr 8, 2013 #1 are they a direct swap crank? or are they different (accept for the stroke)
zwebx Well-Known Member Joined Sep 3, 2012 Messages 3,296 Reaction score 16 Location Melbourne Apr 9, 2013 #2 i just emailed tboltusa will post results
rotn50 Master Spanner Spinning Moderator Joined Oct 9, 2008 Messages 4,930 Reaction score 46 Location Qld Apr 9, 2013 #3 Yeah let us know zac, im sure i read somewhere about it being done on ******minis.
S sm00th Active Member Joined Feb 20, 2011 Messages 33 Reaction score 0 Apr 11, 2013 #4 The oil feed tube needs to be made about 3mm longer
zwebx Well-Known Member Joined Sep 3, 2012 Messages 3,296 Reaction score 16 Location Melbourne Apr 11, 2013 #5 sm00th said: The oil feed tube needs to be made about 3mm longer Click to expand... why? both cranks have the same deck height the 155piston does not go as far down the bore as the yx 160's
sm00th said: The oil feed tube needs to be made about 3mm longer Click to expand... why? both cranks have the same deck height the 155piston does not go as far down the bore as the yx 160's
zwebx Well-Known Member Joined Sep 3, 2012 Messages 3,296 Reaction score 16 Location Melbourne Apr 11, 2013 #6 no response from tb usa yet
rotn50 Master Spanner Spinning Moderator Joined Oct 9, 2008 Messages 4,930 Reaction score 46 Location Qld Apr 11, 2013 #7 Get onto Terry at firepowerminis but for Christs sake do not mention tbolt to him at all.
S sm00th Active Member Joined Feb 20, 2011 Messages 33 Reaction score 0 Apr 12, 2013 #8 The one that goes into the end of the crank on the clutch side. The yx is 3mm shorter than 155ho on the clutch side main shaft
The one that goes into the end of the crank on the clutch side. The yx is 3mm shorter than 155ho on the clutch side main shaft
zwebx Well-Known Member Joined Sep 3, 2012 Messages 3,296 Reaction score 16 Location Melbourne Apr 13, 2013 #9 according to terry from firepowerminis the slinger cranks are 100% interchangable
S sm00th Active Member Joined Feb 20, 2011 Messages 33 Reaction score 0 Apr 13, 2013 #10 Yes oil slinger cranks are interchangable and and non slinger need a longer crank oil feed tube.
rotn50 Master Spanner Spinning Moderator Joined Oct 9, 2008 Messages 4,930 Reaction score 46 Location Qld Apr 13, 2013 #11 Good old short and long cranks