Search results

cheers, needle is in the center position so ill give that a go. :D

sorry to dredge up this thread again, bikes working good, but it surges badly coming off throttle. if you roll it on it slowly it will rev out to full speed fine. do you turn the fuel screw in for lean and out for rich? i cant remember for the fuel screws :o (the one on the inlet side of the...

mmmk. the whole things broken off pretty far down so the whole stub has to get replaced. probably just as well. the weld looks sh*t as haha. cheers

Hey the mount for the bottom chain roller has broken off across the split pin hole so i cant remount the new one unless i go to the trouble of cutting the old one off lathing a new one and welding it on. is it acceptable to just cut the entire thing off so the chain doesnt foul on it and run...

take a look here Hooper Imports Experts on Chinese Motorcycles and Parts, Engines

i took the pocket bikes out to kartattak ages ago. they just let you on at any time when theres no go karts on. not sure if its still the same. its a really tight track so i dunno if youd manage to get a pit bike around there easily we race at wollongong city raceway. theres usually 3 or 4...

problem is SOLVED. the valve clearance was the problem :D thank you sean! runs with the idle speed screw about half out. sounds heaps cleaner as well. time for some fun. :D

no problemo, doin it now. see how it runs tommorow. thanks dude :)

hmmmm doing some more looking around it looks like the clearance is .05 and .08mm pretty well everything i can find says thats about what it is. not so sure what the correct value is now :confused: ChinaRiders.net - Your online China Bike community Forums-viewtopic-Valve Adjustment Tutorial...

aright ill check it out, i tried it without the filter and no difference at all. as for valve clearances i couldnt find anything on the verticals - so i followed this recommendation - its the same motor as ive got but with the air injection port. YouTube - Chinese motorbike adjust valve...

Hey got this link 250 going again. works great, BUT it will only idle off choke (when its warmed up of course) with the idle speed screw all the way in. just pulled the carb down cleaned it out 100% and put it back together and it didnt change, so ive replaced the o rings and gasket on...

Hey, taking the brake disk off to change a smashed rim this arvo - i got them all out by virtue of a propane torch (thats some good chinese loctite they use :p) but the head on 2 where already mangled. so id better get some new ones. any one know where to get rotor bolts?? the local places...

cool, gave it all a test and its for the gear shift, neutral light etc. kick start only loom is done and working :) much cleaner now :D

yeah i reckon so. if any one can confirm that. dont really want to have to take the cover off in case it ruins the gasket just to satisfy my curiosity :D heres a pic of it anyways.

Hey dudes, removing the electric start and all the associated parts with it on a BSE 250cc vertical motor (or link 250cc same deal) and ive got all the wiring traced and sorted. before i redo the loom the only thing i was after clarification on - on the engine there is two wire looms coming...

cheers for the quick help guys, most of the parts are on their way :) got another one for you. cleaned it off and sorted out the wiring. the wires from the CDI where torn out though, so ive recrimped and soldered them just need to know what order they go in the CDI itself. theres 3 wires...

abused more like it :P but yep looking on atomiks site and the 250 LINK it is! looks like atomik sell spares as well. thanks heaps! ill get it running and get a vid of it going :) Link250M - Dirt Bike - Default Store View

cool stuff, cheers. i figured most was interchangable but theres a couple of things that look pretty specific on it like the ignition switch. but yeah its abit wierd haha. for a pitbike its MASSIVE (well compared to the others ive seen). im 5"7 and i can barely get my feet on the ground. and...

Hey all, new here. im a minimoto racer myself but ive been given a pitbike to fix by a friend along with tons of other pocket bikes. that and im looking at getting a pitbike in the future after having had a ride of this one :D does anyone know what brand of bike this one is and where to get...