Atomik AX Problems

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pintorulz

New Member
Joined
Jun 20, 2006
Messages
4
Reaction score
0
Hi

I am a newbie here. I just bought a AtomikAX bike off ebay. GOt it delivered and assembled it and started it up. Started up FIne. The kick start is really hard to push down. Would anyone know how to lose it up a bit if it can be done???

I rode the bike around for a bit and noticed that there is a lot of oil leaking. Its more like its draining. Its comingout at the bottom of where the plate saying DUCAR is on the engine. Anyone know how to solve that problem. I was told to remove a pieace of paper in the breather pipe but have no idea where that is located and how to remove it. Anyone else have similar problems???
 
At the back of the engine find a black hose which will be either plugged or doubled back on itself and release it and let run down between the engine and chassis. It's plugged so the oil wont run out during shipping. It will build pressure in the crankcases and blow your seals otherwise. You may have done that already but we may be able to help you retorque the engine cases if its leaking at the gasket. Find the hose and see how you go.
 
How long did you drive it for like this?
DO NOT START YOUR BIKE UNTIL YOU HAVE DONE THIS OTHERWISE BOOM!!!!

Like the person above seas, you may have blown the seals.
 
I drove it for a good hour all ready... if i blew the seals...wat happens then
 
You already blew the seal/gasket sorry..

Its not abig proble mostly timely..
We have both in stock determine what you have blown and give me a yelll I will send it out to you its not expensive I have a guy on our forum just did the same thing ...It seems to be coomon...

Our bikes come with a big tag thats says REMOVE BEFOR YOU ride...

Well Ebay is Ebay..

Hey if it dosent say in the manual to remove it....Demand a new motor or a repair...
 
You already blew the seal/gasket sorry..

Its not abig proble mostly timely..
We have both in stock determine what you have blown and give me a yelll I will send it out to you its not expensive I have a guy on our forum just did the same thing ...It seems to be coomon...

Our bikes come with a big tag thats says REMOVE BEFOR YOU ride...

Well Ebay is Ebay..

Hey if it dosent say in the manual to remove it....Demand a new motor or a repair...
 
:(
How much am i looking at to get this fixed mate...If i get the part $ and if i bring the bike in to you guys$$

Thank you so much for all your input here guys.....really helps me out...i



will go home and check where this breather pipe is located. Any ideas where i should look for this???
 
pintorulz said:
I just found that posting of where its located thanks mate


Good luck :)

Roll it in we have a look...
As always our advice is FREE...No bull :)

All the Best

WE will alwasy give you advice on how you can do it your self to save your self $$$
 
Back
Top