LXR Anima 190FDX Build thread

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Well done Nick, they are awesome motors, you will have a ball on it. I reckon the 190 is absolutely the way to go. If you ever find the proper needle for the 33, will you give it another try?
 
Well done Nick, they are awesome motors, you will have a ball on it. I reckon the 190 is absolutely the way to go. If you ever find the proper needle for the 33, will you give it another try?

Yeah mate i might do later on down the track but as of now I'm quite happy with the PE28 its more than adequate for the 190 ... geezz your not wrong about the 190 being the way to go ! the power delivery torque is completely off the chart and the sound of it is insane ! Also the updated gearbox ratios in 3rd and 4th is 10 times better plus the decomp system works excellent these new V2 190fdx motors seem to be what they always should of been from the start I'm over the moon now ;-)
 
Awesome, I'm insanely jealous btw, haha.

I was at the local shop today packing up goodies to send to Vegas, threw in 6 clutch kits for the 190, the boys must be hammering them. If they last there, they will last us mere mortals forever.

I want one (stamping feet)
 
What pilot and main jet are you running on the PE28, and weres you clip places on the needle. Great thread this is may I say. Opens my eyes and mind to figureing out how exactly the bike should run with the right jets in thanks alot!! Hopfully get my 190FDX in the next week or 2 in my LXR aswell :) can't wait

Off topic were did you get your sticker kit did you get it custom made? Let me know thanks mate keep it up!!
 
What pilot and main jet are you running on the PE28, and weres you clip places on the needle. Great thread this is may I say. Opens my eyes and mind to figureing out how exactly the bike should run with the right jets in thanks alot!! Hopfully get my 190FDX in the next week or 2 in my LXR aswell :) can't wait

Off topic were did you get your sticker kit did you get it custom made? Let me know thanks mate keep it up!!

Hey Styv I'm running the PE28 with pretty much what the book says : 42/125 jets 3.0 slide << (thats already in the carb when you buy it from DHZ if i remember correctly) you just have to go to the j-parts website and get a JFQ 2.505 needle chuck that in set the mixture around 2 turns out , grab a 48mm uni filter and your good to go...

Im not kidding when i say its an absolute torque monster with this setup the front wheel likes to live vertical alot .

The graphics were made up for me buy Justin @ holeshot hero he done an really nice job .

I just went and spent $170 on all aero-flow oil fittings and braided lines ! should look a treat ;-) freakin Ebay sucks me in every time .....
 
Yeah he will know what one it wasn't too long ago

Sent from my HTC One M7
 
Mine came with that seat cause it's a nitro circus lxr.. hit up dhz maybe they can help you out

Sent from my HTC One M7
 
Project oil line overkill complete ...

Was it expensive ?? Hell yeah

Was it worth it ?? Defiantly

does it look good ?? You be the judge ....

Is it necessary ?? Nope

I even took a silly amount of photos to make your night that little bit better ..... enjoy !!!












 
Last edited:
Looks awesome mate you defiantly have a passion for your minis mate, i reckon it looks awesome. What size are those hose tail barbs? 12mm thread by 8mm hose?


Sent from my iPhone using Tapatalk 2
 
Looks awesome mate you defiantly have a passion for your minis mate, i reckon it looks awesome. What size are those hose tail barbs? 12mm thread by 8mm hose?


Sent from my iPhone using Tapatalk 2

Thanks mate i sure do lol

The oil cooler side are 10mm banjos to 6an fittings and the motor side are m10 x 1.25 to 6an fittings
 
I can't look at this thread anymore, wow
 
Haha Phil, hey does this mean I get the banjos from the cooler nick lol. Damn this bike is awesome, next FOTM you better be in there bro.
 
Lol Im still waiting on the yoshi rs2 so keep your eyes peeled for a few more posts Phil

Sent from my HTC One M7
 
FOTY by MILES. Just stunning.

Nick, are the aeroquip fittings all dash 6? Wonder if the hose size matters? Cause i HAVE to have this, but I'll get Earls to be different, haha
 
Project oil line overkill complete ...

Was it expensive ?? Hell yeah

Was it worth it ?? Defiantly

does it look good ?? You be the judge ....

Is it necessary ?? Nope

I even took a silly amount of photos to make your night that little bit better ..... enjoy !!!













Thats one hot beast so if u dont mind me asking how much to be exact?
 
FOTY by MILES. Just stunning.

Nick, are the aeroquip fittings all dash 6? Wonder if the hose size matters? Cause i HAVE to have this, but I'll get Earls to be different, haha

ha ha all good mate i don't care styv seems to wanna follow my style so why not join the crew doesn't matter to me bud its all dash 6 stuff the banjos are 10mm to 6an and the motor side is 10mm x 1.25 to 6an .

@mick pay postage and there yours


Wooohooo, im on it nick, ill pay on payday this tuesday mate. Chaaaaaaaaaaamp
 
Last edited by a moderator:
Back
Top