Roys CRF MOd

[Georgalis]

Running mx bars with a bmx clamp , the bars might sit a little low ?

 

[Killpatrickyum]

I confused the hell out of myself with all this iv been working 18 hour days n my brain is mush I'm aware those bars n clamp won't work I'm just going to wait until the other parts arrive and start looking for a mx bar clamp n bars ill figure out what I'm doing sooner or later lol

 

[Killpatrickyum]

Are those Sano bars mx?? Thought they were just a shorter bmx style as I got them with the bmx clamp

 

[Hillz]

you got issues dude. ha ha...

our friend Roy is living the fairy tail.... lucky ******* haha

 

[Georgalis]

Are those Sano bars mx?? Thought they were just a shorter bmx style as I got them with the bmx clamp

They look like mx bars in the pic , mx clamps sit higher than the bmx clamp , and they have a wider clamp than the bmx clamp
But it's not really a drama , you can run them the way you have them mate

 

[Shearer]

our friend Roy is living the fairy tail.... lucky ******* haha

[/img]

Yep thats funny Fairy tale hillz, Id be to scared she say Yes me lol

Build Going good roy ,

 

[Killpatrickyum]

Paying balance on motor and other parts to spread across the mod and the stoka in the next day or so it will all be on the way then ill have a lounge room full of bike builds haha living the dream , well kinda but haven't had a chance to do much dreaming , one week into my business I'm crapn dax on how hard it is financially to sustain and my time for life is zero % working 12-18 hour days making money n spending lots to keep it all going but ill get there n with the help from you lot ill eventually build this thing

 

[Killpatrickyum]

Question are my rx zokes longer than toms n gerros? I'm guessing they are n I'm wanting a setup like theirs I think shearer has the same type setup on his mod, all this crf stuff has been a big learning curve , are the forks on shearers and toms n gerros basically a full size fork shrunk down but with the thicker legs n housed by triples or am I tripn n my zokes are the same length ?

 

[Shearer]

Forks on mine , toms n gerros , You say like big but scaled down for size of bike mite say yeah. work on smiler priceable with oil with comp n rebound dampening. Do upgrade heap from stock setup up where they are springs packd with grease
http://www.fast50s.com/cart/customer/product.php?productid=142&cat=21&page=1
these are the forks had on my limited at yanakie , that you had ride on man!

Of top head tom had sano bombshells on his ride!
Marzocchi crf50 forks gerro on his sweet ride.
On my 10" bike yellow one u road bit. has Marzocchi forks also, just think mine are the old style and they little shorter then later model forks that gerro got. Have to messure mine n let you know!

Trick is to get the bike to sit level! so if got longer forks , will need to match it up at rear or be way chopperd in front, n steer slow n bottom out n rear alot.Can get away with back little lower! depends

That make sence! say boys pot me stragiht if im not

 

[Killpatrickyum]

K bit pissed just checked in after not having enough time to get on here n seeing vcm round canceled iv put a lot of time and cash in getting stuff right but ill get over it , i finally got the parts I'd been waiting for and have made a heap of progress .... I didn't think things would come together so quickly and I'm sorry if this is a rushed update but ill try and do it in stages so you get the idea

Merry Xmas

So it was like Xmas
Motor - crf5o bottom end with taki clutch and taki high volume oil pump , lightened flywheel , taki barrel , taki cam , taki piston , stock head and porting -motor was setup for a limited 50 I also got a spare couple stock barrels and a taki barrel and piston that is useable
Heaps of spares and seals and gaskets the bloke I got it all off is a motorbike mechanic spare cams and all sorts of bits, forks are stock outers painted and iv been told Sano legs , possibly just stock or aftermarket but with a bracket to mount the Sano bombshell front brake setup , wheels are exel's with hd hubs and spokes I got the stock drums also I got the five o disk conversion kits the swinga is a +2 five o ... I'm smiling now but I wasn't a few days ago when I realised the thing was cracked as well as had a rub mark In it from a pipe bottoming out but iv got a gun welder mate and she's brand new again didn't think it would come up that good
Also got a five o throttle and dipstick and a heap of stock parts iv got heaps to share and tell but I need sleep ill try complete this in the next day or so

 

[Killpatrickyum]

I was so confused with all the parts on top of what I already had collected so while I was at buzz bikes getting my bikes sorted for vcm I asked Greg for some help in deciding what to do with what parts I had and to know if what I wanted was going to work , This was about 2 last satdy arvo ... Cut too ..... Greg says , oh just grab the swinga n frame n just mock it up , then the wheels n forks .... Bit more n all of a sudden it's four in the morning lololo lol really didn't plan on it but well Greg n I kinda built my dreamlike in a night lol n when you get to build a bike at buzz it's not like they are short of parts so Greg just Kepler going to his magic cupboards n pulling out gems

 

[Killpatrickyum]

At this point we were trying to see which forks would sit the bike in the nicest way , problem was the stoka forks are only stoka spring type forks n quite small and the rx zokes in my eyes are too big but I settled with the Sano forks n really wanted that front end or at least wheel and Brake setup

Crack Found in the swinga was furious but all sorted now

The bloke coulda told me was pretty pissed

 

[Killpatrickyum]

Anyway cut to the build in progress
With so many parts to choose from of my collected bits n the shop full around me I was in heaven n Greg didn't let up pretty sure it was bang on four am when we emerged from his factory lol ill finish up tomo boys

 

[Killpatrickyum]

Sneak peak

 

[Georgalis]

What a legend staying up till 4 to build your bike
Keep the pics coming :congrats:

 

[Karlos247]

Best way to spend an all-nighter. Looking good mate. Geez I'll have to start my crf build thread soon

 

[timeeh]

:cheer2: Lookin sweet man

 

[8r3nd0]

Looks schmick lad, did the kicker clear everything?

 

[Killpatrickyum]

Yeah cheers boys n yeah Brendo bit of ****ing around but all good will do a update in the next day or so to show u all where I'm at n any issues I had along the way ie head stem bearings n lil mod bits

 

[Shearer]

Looking good roy ,
Staying up late is the best time to work on ya bikes.
Your on to it!