What motor do I have?

[Mland.514]

Bought a klx 110 with a different motor in it

Here's the info I have on it
Serial # on the motor - 1p60fmj
It says yx 150 on the outside of cylinder

Where can I find parts for this? It seems like it's not getting good consistant spark, I can take the mag and move it side to side like it was loose and I popped it off, the keyway to keep it inline on the crank was totally trashed! Not even a square anymore.
Hopefully this will be an easy fix!

Anyway If anyone can help me out telling me what motor this is and where I can buy parts I really appreciate it!
Thank you!

 

[xLOCOx]

welcome to the minirider forum.. glad to have you on board ... go introduce yourself here... :http://www.miniriders.com/general-chat/20824-introduce-yourself.html

ok so your bike is a genuine klx 110? a plate should be stamped on the headstem either having a vin No. or it will have plate thats riveted on.. cant remeber what kwaka do lol
umm.. so you've got a yx 150 good score!
when you say a not so much of a consistent spark.. itll either be the cheap china plug or the coil pack.. chuck a NGK Spark Plug C7HSA in it see what the results are!
now the crank... i think it maybe up for a new one.. so it would cost you about 100aud for a 150 crank inc post.. :OORacing - performance monkey bike, pit bike, madass, zoomer, dirt bike components - Crankshaft YX150/160/170 53mm or 57mm stroke non oil spinner type (Powered by CubeCart)
cheers loco!

 

[Mland.514]

welcome to the minirider forum.. glad to have you on board ... go introduce yourself here... :http://www.miniriders.com/general-chat/20824-introduce-yourself.html

ok so your bike is a genuine klx 110? a plate should be stamped on the headstem either having a vin No. or it will have plate thats riveted on.. cant remeber what kwaka do lol
umm.. so you've got a yx 150 good score!
when you say a not so much of a consistent spark.. itll either be the cheap china plug or the coil pack.. chuck a NGK Spark Plug C7HSA in it see what the results are!
now the crank... i think it maybe up for a new one.. so it would cost you about 100aud for a 150 crank inc post.. :OORacing - performance monkey bike, pit bike, madass, zoomer, dirt bike components - Crankshaft YX150/160/170 53mm or 57mm stroke non oil spinner type (Powered by CubeCart)
cheers loco!

Thanks for your help,
Yes this is a 2009 klx 110 chassis it is stamped on the frame.
I don't think I need a new crank, the keyway on the crank that keeps the flywheel straight is really smashed up and the flywheel was loose. I'm going to try putting a new keyway in the slot and tightening it up good hope this solves my problem

Are the yx's good motors?

 

[Mland.514]

Sorry I worded that wrong the keyway in the crank is not smashed up, the square key that goes into the slot is what's smashed up. How that happened is beyond me.. Haha

 

[xLOCOx]

nahh thats cool!.. so the cranks keyway is fine?
if so the flywheel :Magneto Rotor FIT FOR YX140 150 160cc Engine | eBay
yxs are good motors... treat'em nice, they'll last

 

[Mland.514]

nahh thats cool!.. so the cranks keyway is fine?
if so the flywheel :Magneto Rotor FIT FOR YX140 150 160cc Engine | eBay
yxs are good motors... treat'em nice, they'll last

Thanks yup both keyways are good it is just the square key that inserts in the slot itself that is smashed up