Doms KLX110 mods needed

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This is my old klx with 60 forks . sat fine , i think that even had the stock shock in it in this picture to?

Mite have to rise the forks in the clamp abit , not positive but you mite need a aftermarket topclamp to do it ?

6531_120132736940_3265583_n.jpg
 
This is my old klx with 60 forks . sat fine , i think that even had the stock shock in it in this picture to?

Mite have to rise the forks in the clamp abit , not positive but you mite need a aftermarket topclamp to do it ?

6531_120132736940_3265583_n.jpg

Cheers
That klx looks great. It sits quite nice.
I am just waiting for the bloke to give me a buzz back about the kx60 forks as the minister of finance has given me the go ahead to spend some more coin.

Dom
 
That's my klx now ; ) I have the kx60 forks sittin in the shed doin nothin but collecting dust...if ya keen might be able to work something out?
 
wat forks did you put on nemo?

my klx110 has kx60 forks, sits nice. too soft but. got some springs comin from the states that suit my weight. fair bit more expensive than the klx springs but. would be cheaper to put the klx spring in and machine up some spacers. going to chuck some 15 weight oil and replace the seals while im at it.
 
That's my klx now ; ) I have the kx60 forks sittin in the shed doin nothin but collecting dust...if ya keen might be able to work something out?

I am just waiting to get some parts for the KLX at the moment. She is not running to well. I am hoping it is the stator but I have to see. I will not be able to do anything until I get this thing going again. Kawasaki has told me it could be anywhere from 2 to 4 weeks until the parts get here.
 
Yepp : ) although I wouldn't mind some cut down cr85's
 
Ok so KLX isoff the track completely now. The bike would run fine but after giving a quick and hard rev it would stall. It had me buggered and for a while I thought it was the carbie. Turns out I was only getting 9volt from the stator and .1volt from the pickup. So parts have been ordered and I am just waiting and hoping that this is the problem.

Nemo I will be sending you a PM about the kx forks mate pretty keen on them so I can just use the fastace that I have on layby for the crf if I ever get it.

As soon as it is running and I am happy with it the following will be ordered and the build will start.
DNM rear shock, the Ishock is s*% house.
Over the top brake lever
 
Back
Top