FOTM Entry's ~ March 2010

[199]

that thing is a beast wog!!!!

 

[user 12599]

Mboy

Crf50 2007

Motor modification

TB 88kit.
TB piston.
TB barrel.
TB race cam.
TB 20mm carbie.
TB air filter.
TB rev box.
TB high volume oil pump.
TB Manuel clutch.
Polished case’s and motor (has to be in sun) for you to notice the top of the motor.


ROLLER:

Stock crf frame:

Painted mounts (kinda hard to notice) again angle of pic.
Kenda front tire.
Rear rim no brand (while my honda is getting painted hub and laced with HD spokes).
Flat seat.
Pro taper BMX bar kit.
TB leavers.
Copy pro circuit pipe.
heavy duty Gold chain.

I have done all the work myself seance I brought this bike brand new in 07, just a little thing I have done my self, the pipe I brought from DHZ yes its a fake pro circuit made for a 140, I cut it down soo it dosnt stick out of the back as much and it also has made a far bit of a performance different and sounds really nice!!! and i also did the 88kit ect. anyway thats my bike... happy voting

arr may as well see how many people dont vote for my bike, ahaha few little changes rim is all laced up looks full trick but just need tire if i get her on before voting starts i shall update pic!

 

[Russbream]

Can I enter a Vertmax Bike once they arrive??

 

[DvDRip]

atomik boys bike FTW!!!

 

[atomik boy]

so can i enter???

 

[DvDRip]

so can i enter???

you already have

lol, good luck with that

 

[atomik boy]

yaaaay i have absolutly no chance of winning!!! oh well i just wanted to have a go!!! everyone vote for atomik boy!!!

 

[user 12599]

omg lol, atomik boy.. you could have put a lil effort in and at least cleaned your bike! lol ohh well at least we all know it gets used

 

[no_crf50_here]

Soo...can I enter?

 

[atomik boy]

yeah well tommorrow ill clean and get some better pics just i was too lasy the past 3 days so i belted it round from 3:30- 5:50

 

[FMX_22]

well im entering the next 1 all i need to get is a new seat new back plastics and put on my grafix and get my new billet cap . gl atomik boy lol

 

[modified minis]

soon as i figure out how 2 get fotos on here ill show ya me rides if ya like hondas uwl vote for it

 

[tomy251]

Ill try and get little bits on my Bike on and get some Photos up hahaha. LONG TIME coming!

 

[Peter1230]

yeh wodds had a mad LXR.. but omg i never seen a china like wogtaz's its insane.. loving the grpahics kit.. how much approx all up for that set up?

got my vote.

 

[TyD]

Oh no, LXR has no chance against my killer mso.. lol.. jkz jkz..

Mods:
26mm Flatslide Carby
Unifilter
Pro Tapers
Chopped plastics
Hasn't got the motard rims and tyres or gold 1/4 turn throttle on yet...

 

[no_crf50_here]

Motor : GPX160

Head :

TB V2 S35 CAM
NGK Iridium CR6HIX Plug
Port matched
TB Decomp Kit (not fitted)
Coil : High powered coil & Lead
Piston : 60mm Std Compression Piston
Stator : ORK
Clutch : Stock Basket & TB 6 Plate Clutch
HD clutch springs
Oil : Motul 5100 motor oil
Carbie : 26mm Genuine Mikuni Carbie
Red TB air filter
TB inlet manifold - port matched
Sprockets : 16t front 37t rear
420 pitch DID chain
Alloy rear sprocket
Tyres : 12" x 2.15" Tubeless Mobster Alloy Wheel with Dunlop TT92 front tyre 90/12"
12" x 2.50" Tubeless Mobster Alloy Wheel with Dunlop TT92 rear tyre 110/12"
15mm Axles
Suspension : Fast Ace AS02's front forks
Fast Ace BS58AR rear shock
Brakes : KX80 Master with AS02 caliper
220mm disk
Braded brake lines
Standard rear setup
Frame : 04 Thumpstar Billet Alloy Frame
Pitboss swingarm
Hangers : Pro Taper SE hangers
Pro Taper Pillow top grips
Silver Fold back brake leavers
1/4 turn throttle
Barkbusters leaver guards
Footpegs : Alloy foot pegs mounted to light weight peg mount
Exhaust : Customised exhaust, moded to fit frame
Plastics : Honda CRF50 Plastics with Sik50z sticker kit

 

[atomik boy]

ill have to go for no_crf50_her's bike!!!
either that or the bling ten

 

[roost666]

Motor : GPX160

Head :

TB V2 S35 CAM
NGK Iridium CR6HIX Plug
Port matched
TB Decomp Kit (not fitted)
Coil : High powered coil & Lead
Piston : 60mm Std Compression Piston
Stator : ORK
Clutch : Stock Basket & TB 6 Plate Clutch
HD clutch springs
Oil : Motul 5100 motor oil
Carbie : 26mm Genuine Mikuni Carbie
Red TB air filter
TB inlet manifold - port matched
Sprockets : 16t front 37t rear
420 pitch DID chain
Alloy rear sprocket
Tyres : 12" x 2.15" Tubeless Mobster Alloy Wheel with Dunlop TT92 front tyre 90/12"
12" x 2.50" Tubeless Mobster Alloy Wheel with Dunlop TT92 rear tyre 110/12"
15mm Axles
Suspension : Fast Ace AS02's front forks
Fast Ace BS58AR rear shock
Brakes : KX80 Master with AS02 caliper
220mm disk
Braded brake lines
Standard rear setup
Frame : 04 Thumpstar Billet Alloy Frame
Pitboss swingarm
Hangers : Pro Taper SE hangers
Pro Taper Pillow top grips
Silver Fold back brake leavers
1/4 turn throttle
Barkbusters leaver guards
Footpegs : Alloy foot pegs mounted to light weight peg mount
Exhaust : Customised exhaust, moded to fit frame
Plastics : Honda CRF50 Plastics with Sik50z sticker kit

LOL now thats a mod list nice man.......hmm woggy or no crf for me atm

 

[no_crf50_here]

that's how it appears on my insurance for it. How ever just been told i can't insure it anymore i have to go to shannons or something

 

[tomy251]

that's how it appears on my insurance for it. How ever just been told i can't insure it anymore i have to go to shannons or something

Haha NICE!

Who did you use to have it Insured by? Im thinking of getting my 88 Insured, worthwhile to have for sure.