FOTM Jan 2015 Sign on page

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Got $600 and the thumpster for my dpro.
Good deal I reakon.
 

Attachments

  • uploadfromtaptalk1422155164822.jpg
    uploadfromtaptalk1422155164822.jpg
    5.4 MB
I've got one more here ready to go if need be...


Sent from my iPhone using Tapatalk
 
I have couple of other minis that haven't pot in fotm comp before!
Or can you pot back in me bikes that never did any good?
 
Braaap Pro Factory 190cc





Mods include -

Miniriders Customised 2009 Vegas Sticker kit
Renthal FatBar Ricky Carmichael High bend bars
Troy Lee Designs / ODI grips
ASV F3 copys
Kenda Carlsbad tyres
Bright Red painted Rocker Cover
DID NZ3 Chain
Polini PWK28 carby
Red Uni Filter
Red Fuel lines, Red Silicon breather hose's
Modified KLX110 Bash Plate
Folding Gear Lever
Custom Oversize Oil Cooler
Custom Rear Mud Flap
 
2012 motovert type RIMG_4269.JPGIMG_4268.JPG
yx 160cc stock engine
mikuni 30mm carb.
outerwears pre filter
OOracing CDI
crf110f plastics
Pitsterpro LXR alloy wheels
bridgestone rear tyre
kenda front tyre
heavy duty kick starter
alloy shifter
rk chain
hour meter
pc copy pipe
 
Last edited:
Well if no one else is in?


Levi's mod trike








Mods include:

- Cordogs Custom plastics
- Slider wheels
- rotating spool valve
- flux capacitor
- New exhaust bearings
 
Ok, arm twisted!!

It might be easier to mention what parts are left of the standard Tonelli:
Headlight,
Tailight,
Indicators,
Switch gear,
Half the wiring loom,
Tank and;
Frame, although modified to mono shock!!

Modified:
190 FDX Anima,
Keihin 28mm PWK,
Faddy Bike Exhaust System,
Uni filter,
GPX Black label forks 660mm,
DNM 240mm adjustable shock,
DHZ GPX alloy swing arm,
DHZ 12" motard wheels (2.15/2.5)
Michelin pilot pures
220mm pitster front brake disc, caliper and master cylinder,
Venhill 980mm swivel banjo braided hose,
200mm pitster rear brake disc, caliper and master cylinder,
Billet rear sets,
Custom roll seat,
Z9 rep duck tail,
Trailtech vapor speedo,
Universal 7/8ths bars,
Custom mirrors,
Single pitster oil cooler,
Braided oil lines,
18/31 talon gearing and I'd still like it longer, don't we all!!!

Build thread here:
http://www.miniriders.com/zedder-builds/38982-z50-gorilla-replica-tonelli-g125.html


Props to Eichkay for the pic:
monkey%20beach_zpsc17nx6li.jpg


PB and not out of revs yet!!!
130_zps20959bf5.jpg
 
Last edited:
^^^^ Awesome! :thumbup:

Cheers Ringo, the comp was starting to look a bit sparse.

The trikes a filler, get your bikes in guys


@Brendo

Entry closes on the 28th shags.
 
newy50n , you did a number on those bike pics , what's up with all the black at the top and bottom of your pics ? Rushing as usual I bet #*******
 
i'll put my "rodbox china" in
originally a 04 or 05 motovert 138 i think. came in a box of hopes and dreams that quickly turned into regret and nightmare.
held together with superglue zipties and duct tape.
zongshen 110cc estart without the estart
mikuni carby with a ziptie to hold the choke off.
dnm X4R rear shock which is worth than the 2 bikes put together.
no brakes.
spray painted wheels
bicycle bell
plastic throttle.
pro taper bars.
0-100 in 20 minutes with epic rattle and wheel wobble at 30kph
1mm of front end travel
bald front kenda tyre
1235469_4952898114278_588545272_n.jpg

will get a new photo as realized thats the 138 engine.
 
Last edited:
Bags a spot. Will have mine ready by then. It's so close to ridable again. :)
 
Nah I'm all over this **** this time. :)

Only taken me 7 years to put one here but you can't rush these things.

Screw ya Sinister 50's kit's I reckon my custom miniriders one looks even better!! ;) haha

Justin will have a heart attack when he see's it actually on my bike. LOL
 
Thort this would of been voted on by now


Sent from my iPhone using Tapatalk
 
Back
Top