keihin 24mm replica ok for lifan 125?

[Nic19]

hey guys i have a lifan 125 and need a carby just wondering if these replicas are ne good? and what size 24mm or 26mm?

 

[edzy]

yeah there great, get a 26mm

 

[Nic19]

heard 26mm may be too big? also what jet sizes will i need? its just a stock lifan 125. will the ones that come with the oko carbs be fine? need help 24mm of 26mm?

 

[cass38a]

yeah there great, get a 26mm

It was only a couple of days ago you were asking questions about which carby you should use for a 140, now you are telling him that this carby is the best for a 125cc.

http://www.miniriders.com.au/forum/tech-talk/15935-oko-26mm-28mm-lifan-140cc.html

Do you really know which is the best for a 125cc?

Have you even got your carby on and tuned yet?

I am not going to answer your question because I havent tried a 24 or 26 OKO on mine but Cactus or Mack would be your best source of info for this question.

 

[Nic19]

nah i ended up buying a 125cc not 140cc . so havnt got a carby at all yet.

 

[cass38a]

I wasnt referring to you, It was EDZY i was having a go at. He dosen't know what is the best carby for him but was telling you what you should get, he only asked the question 4 days ago so I doubt he as got his carby and dialed it in yet.

I know you dont have a carby.

The OKO is probably the one to go with as the Mikuni copys are hard to adjust as the piolt screw is in a bitch of a place. In saying that I spent a couple of hours jetting and tuning my Mikuni and it works sweet now so I doubt I will ever change it.

 

[themountain]

I wasnt referring to you, It was EDZY i was having a go at. He dosen't know what is the best carby for him but was telling you what you should get, he only asked the question 4 days ago so I doubt he as got his carby and dialed it in yet.
.

...yeah and afterwards he sends them a PM to buy one from him...pretty sleazy

back to topic:
I´ve got a PE24 on some Lifan125...pretty decent...#100 mainjet, #35 pilot at sealevel

 

[Worm]

I was riding with a guy who had a 28mm oko and it was fine. Had been re-jetted. Went hard as. So I would def go 26mm or 28mm not 24mm

 

[themountain]

I was riding with a guy who had a 28mm oko and it was fine. Had been re-jetted. Went hard as. So I would def go 26mm or 28mm not 24mm

depends on where you ride ...open MX...you can go 26mm...tight track ...go for the 24er

A 28 is overkill if you don´t have a ported head!