Official Post pics of your bike Thread

[byh0005]

heres my bike its a 2009 atomik motox 125cc with a ducar elec start
changes so far
new plastics
mlc tacho
thicker fork oil

 

[Yamah_arider]

My fully sik PP Bigfoot

 

[Stubsy]

Here is my MSO 140 with its new sticker kit. soon to come - exhaust, outer rotor kit and maybe a cam

 

[TyD]

did your mso come with white plastics and sticker kit?

 

[DvDRip]

Stubsy instead of exhaust and ORK just get the cam, it'll make a bigger difference than both those mods put together, and would be cheaper than either one of those mods.

nice bike by the way

 

[Stubsy]

hey TyD nah came with white plastics, white stickers. got lucky with removing the stickers. putting new ones on was a different story.

And DvDRip, cam is the go hey? any recommendations???

 

[DvDRip]

what kind of riding do you do?
a1 is bottom end torque
a2 is all rounder
a3 is top end screamer
I would go a2

AKUNAR MOTORCYCLE CAMSHAFTS
you'll need valve springs and a head gasket too

should work out to around $80 plus post, pretty cheap really

 

[Stubsy]

thanks for that mate. yeah ill be going no 2.

 

[thump*140]

Stubsy you should consider an OKO 26mm flatslide carby as well. A2 cam will work alright, but you'll still have the **** as **** mikuni 26mm carby... The performance gains had, by adding an OKO 26mm are well worth the cost.. $120 for the whole kit from DHZ...
and an ORK on a Lifan 140 will make a hell of a difference, as the stock 140 stator is big fat chick of a flywheel.. plus the ORK will allow to tune the ignition advance, less chance of doing starter gears..

 

[Stubsy]

cool thanks thump. ALso if i buy a oko 26mm then add the ORK and cam will the carby be still a good size or would a 28mm be better suited??

 

[bournie]

heres my bike its a 2009 atomik motox 125cc with a ducar elec start
changes so far
new plastics
mlc tacho
thicker fork oil

You should get some new graphics for that aye

 

[DvDRip]

cool thanks thump. ALso if i buy a oko 26mm then add the ORK and cam will the carby be still a good size or would a 28mm be better suited??

nah mate 26mm is still best. even 150's 160's come stock with a 24mm carby
I'd say carby and cam are the best mods you can do. ORK is good but I'd leave it till last

 

[thump*140]

cool thanks thump. ALso if i buy a oko 26mm then add the ORK and cam will the carby be still a good size or would a 28mm be better suited??

yes mate, the OKO 26 will be more than enough carby, even with the cam, exhaust and ORK. The 26 is also far easier to tune right through the rev range than the 28mm..
Ken's OKO's come tuned pretty much bang on straight out of the box nowadays, so they're more or less a plug and play item... and yes, you will notice massive increases in performance compared to the ****ty mikuni carby..
Rip is right, do the ORK last, as this isnt exactly a horsepower increasing part.. what it does, is allow the engine to spin up, and grab revs faster, as it decreases the engines rotating mass, by having a lighter flywheel... Best part about the ORK's, is that it allows you to advance and retard the ignition, making for easier starting, and decreasing the risk of kickbacks, thus decreasing the chances of blowing the kickstarter gears..

 

[woods11]

Updated pics of my LXR build

 

[pbk]

hmmm that is a nice bike but not too sure about the gold wheels...

and i saw those pro ciruit pipes hanging in dhz when i picked up my pitster and they didnt look all that flash

 

[wogtaz ryder]

Well if they produce what they claim , a full Hp on big V2 motors , i dont give a **** how it looks lol .

Awesome bike Woods! change of graphics already?

 

[thump*140]

woodsy, Nooooooo, mate where did the oldschool YZ graphics go??? they were pure porn!!! and matched the gold rims...
and yeah woggy, that things goes like a *******... very fast little machine...

 

[woods11]

You definetly notice the power of PC pipe. Its very quite at idle but sounds like a race bike when you open it up.

I had a bit of a spill and trashed a side panel and the radiator shroud so i needed some new plastics and graphics, and i had coupon for JJW graphics.

 

[TyD]

those rims scream china..

 

[winky34]

You definetly notice the power of PC pipe. Its very quite at idle but sounds like a race bike when you open it up.

I had a bit of a spill and trashed a side panel and the radiator shroud so i needed some new plastics and graphics, and i had coupon for JJW graphics.

how much did the graphics cost ?