Sator plate change on 125 lifan.

[locko90]

I got a new sator plate for the old 125 i had sitting in the shed.

Swaped it out all good but now im trying to test for spark but no luck.

I have the wires connected up all good.
Black red - black red, blue white - blue white, green to green.

Got kill switch hooked up and sator.

But not sure about this little wire part of to the side.

Sent from my SM-G900I using Tapatalk

 

[motodevo]

The spare wire at the stator is for a neutral light switch, just ignore. If you're testing it just like you have it all laid out in the photo, have you earthed the plug body (threaded section that screws into the head)? If still no joy, disconnect the kill switch so you can rule that out, black with yellow and green(earth) to the coil, make sure black with white isn't joined to a green (earth)

 

[locko90]

cheers for the reply mate ill have a look at it tomorrow see if I can find out whats wrong,

I bought a second sator plate aswell for the 140 lifan I got, swap the old broken sator plate out no worries, and the new one has got the spark plug working.

so ill prob just use the wireing harness off the 140 for the 125 and see it

 

[locko90]

So yeah put the wiring harness from the 140cc and got the 125 running so im stoked bout that. Can swap the 140 out now.

Sent from my SM-G900I using Tapatalk