what are the best mods for a pitpro 125rr?

[matt125]

i was wonderin what the best mods would be for a 2009 pitpro 125rr and what the good and bad is about this bike as im thinkin about gettin one from east 50's for $880 is it worth it?

 

[dhz140cc]

get a fully hectic nos bottle hooked up str8 to the intake manifold

 

[minibikecr@zy]

what type of mods do u want.

 

[matt125]

i want mods to make it a more reliable bike

 

[minibikecr@zy]

make it breath better get a uni or K&N airfilter and ngk sparkplug, better chain

 

[DvDRip]

Unifilter
RK or D.I.D chain
Tires
Fastace or DNM Rear Shock
Protaper Bars (xr50 bend) and some decent grips
Rim Lock
Copper exhaust Gaskets and double nuts on the exhaust mainifold
Hi-Tensil Bolts EVERYWHERE
Billet 1/4 Turn throttle
Lube the cables, grease all other moving parts
Replace fuel line and install an inline fuel filter
Sprockets for better speed and turn it into a 4 speed
Dot 4 Brake Fluid and new Fork oil, and of course engine oil
Decent Carby

that's all I can think of for now but all these mods are worth it but some more necessary than others

 

[matt125]

do you know of any good websites with these parts for good prices and where can i get hi tensile bolts to suit this bike?

 

[minibikecr@zy]

have a look on ebay theres some good stuff on there just watch out its not a copy.

 

[DvDRip]

DHZ on ebay has a great range of parts with even better prices. also look at KDF and JustRide.

for Hi-tensil bolts you need to take your old bolts to a bolt shop and get them to match it.

 

[DvDRip]

fuel line/filter & chain you should get from your local jap bike shop

 

[thump*140]

Hopefully this may be of assistance... few basic upgrades in there too.
http://www.miniriders.com.au/tech-talk/24009-performance-upgrades-guidelines-stage-i-iii.html

 

[marky351]

double exhaust like on the crf250's

 

[Satchy]

hi tensile bolts are a bit of an over kill for all over.... maybe for swinger bolt and motor mount bolts.
steel bolts will do fine i didnt say stainless steel this way youll still have some cash in your pocket

my 2 bux worth!

 

[DvDRip]

hi tensile bolts are a bit of an over kill for all over.... maybe for swinger bolt and motor mount bolts.
steel bolts will do fine i didnt say stainless steel this way youll still have some cash in your pocket

my 2 bux worth!

the long bolts for the bar clamps and engine mounts are the only pricey ones, about $20 all up. The rest of the bolts cost me about $7 and I'm talking HEAPS of hi-tensil bolts