What did the postie bring you...?

[my67xr]

looks good.
make sure where the coil bolts to the frame that it is to clean bare metal,
even put a smear of grease on the bare metal to stop it from rusting and causing problems later.

 

[zwebx]

Some metal carbide dremel bits A++ 18 dollars china ones.. Takes soo much less time than trying to use sandpaper to port the head very pleased and they were only 18 dollars delivered

Take a guess...

 

[LJasonH]

View attachment 10513 Some metal carbide dremel bits A++ 18 dollars china ones.. Takes soo much less time than trying to use sandpaper to port the head very pleased and they were only 18 dollars delivered

View attachment 10514 Take a guess...

I would like to see how head porting goes - kinda scared to do it on any engine. My chinese set was 2mm too big for the collet I had so I used a drill press and grinder to get them to size.

I'll take a stab and say an exhaust...

 

[my67xr]

I would like to see how head porting goes - kinda scared to do it on any engine. My chinese set was 2mm too big for the collet I had so I used a drill press and grinder to get them to size.

my Z Ho head is getting there slowly too

exhaust-





Inlet-

I'll take a stab and say an exhaust...

to suit a KLX TB V2 head i reckon !!

 

[gottagetacheaperhobby]

 

[my67xr]

that cam and springs didn't take too long stu.
my stuff from TBoltMX was only about 6 days from when i ordered it too.

View attachment 10513 Some metal carbide dremel bits A++ 18 dollars china ones..

same as my set, but mine were $13 inc delivery from Taiwan

 

[gottagetacheaperhobby]

nah better than a lot of ebay seller's shipping times thats for sure. best be getting a set of those dremel bits myself i think, at that price ya cant go wrong, were they just ebay specials craig?

 

[my67xr]

was Singapore actually-
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=171402973389

 

[zwebx]

View attachment 10515 The head im doing at the moment, nothing to be scared of other than touching the valve sealing surfaces really quite easy with a dremel.. a die grinder i would say otherwise..

 

[zwebx]

I saw them But i thought $5 bucks and incl shipping from nsw instead of waiting from taiwan.. much better

 

[zwebx]

So far, no problems porting (quite alot of work to be done) a alloyminum head X4 cylinders... X16 ports
Quite easy to use a little hard to get a good finish (without accidently tunneling) May end up finishing it up with some sanding rolls But all the bits seem to fit my purposes perfectly i do not regret getting them at all

 

[zwebx]

Originally Posted by LJasonH
I'll take a stab and say an exhaust...

to suit a KLX TB V2 head i reckon !!

You sir/gents just won the game: :congrats:

 

[xLOCOx]

ohh looky here!!! bearings!!!
thanks blender!! lifesaver!! and a legend!!

 

[LJasonH]

Why hello there...

A bit of trouble with StarTrack, but it came safe and sound.
Big thanks to the fellas at DHZ for the great deal and support.

 

[zwebx]

Wicked it finally turned up you must be over the moon

 

[LJasonH]

Wicked it finally turned up you must be over the moon

That I am!

Just waiting on some final parts to show up that were missing. Almost ready to ride. :afro:

 

[zwebx]

Whats missing on her?
She's looking good i quite like dhz's range i think every single one is pretty much what i would be happy selling

 

[LJasonH]

The front axle nut. :lol:
And a part that I forget to get were fat-bar clamps.


They are great looking bikes, so hopefully it will run like a beaut!

 

[Rikchick]

New plastics for the boys bike.... He is very happy with the green, so now just to add some stickers to it and it'll be mint. Oh and I got to put them on racing the setting Sun.....

 

[LEO DPRO 037]

cHrIsTmAs AlReAdY???

Has Christmas come in august??
A young man that didn't remotely resemble santa baught me a package today.
what a nice boy!!!

Cant wait to trash tracks again.