LXR Anima 190FDX Build thread

[Carlts]

yeah mate, the original daytona cover (assuming it would fit a yx160)

 

[nickv1980]

yeah it will bolt up fine id say

 

[Carlts]

PM Sent.

sorry to thread-jack mate.

 

[nickv1980]

kitaco super coil fitted... new takegawa oil temp gauge fitted went for a ride today on the flat track at pac park for a final run in with a lot more throttle action she's running sweet will upload a vid soon ;-)

pics of the coil and temp gauge install on a custom bracket ...

 

[nickv1980]

got a video to upload how in hell do i embed it i give up !

 

[Styv_Loosekid_21]

How much oil these suckers take nick? Sorry of topic but I'm having a little problem maybe with the oil not circulating properly.. Worried the lines might be wrong as it seems
Oil gets takin up to coolers and I think it's not returning?? Site glass says no oil after engine off and sat tere for 10-15mins

 

[nickv1980]

How much oil these suckers take nick? Sorry of topic but I'm having a little problem maybe with the oil not circulating properly.. Worried the lines might be wrong as it seems
Oil gets takin up to coolers and I think it's not returning?? Site glass says no oil after engine off and sat tere for 10-15mins

I put 750 mls in mine which brings the oil level up to the dipstick thread .

The bottom line on the motor pumps the oil up to the cooler which I've connected to the right side then it crosses over to the left and returns to the top line on the motor ...

check your banjo lines and banjo bolts and make sure all the holes are clear I've actually had a banjo line on one of my old bikes which had no hole !

I changed all mine to dash 6 stuff alot bigger and defiantly flows great

 

[nickv1980]

Figured out how to bloody embed crap finally !!! Edited Anima WOT action :


[youtube]wL1av-AHlXc[/youtube]

 

[Styv_Loosekid_21]

Were did you get all those oil lines?? Yea I guess I better take the bolts out make sure there all clear!!

 

[nickv1980]

The oil lines i custom made myself from standard dash 6 Aeroflow fittings and stainless braided lines and the cross over is 7.5mm efi rubber hose covered with a stainless spring to protect them and a takegawa oil temp fitting in the middle of the cross over to watch temps up at the coolers it works mint but wasn't cheap to set up

 

[Styv_Loosekid_21]

How much you charge to make those lines mate? I might be keen on a set

 

[Phil67]

This video is private. NOOOOOOOOOOOOO

 

[nickv1980]

Fixed mate i have no idea why that always happens ...

 

[nickv1980]

How much you charge to make those lines mate? I might be keen on a set

you can make it all up yourself it quite easy just look on youtube how to assemble speedflow / aeroflow fittings..

Its not cheap though .... around $170 for all the bits you need plus lines then about 45 mins to cut to length and install all the fittings ... There all screw compression fittings and banjos ... I can make you up a parts list with links to the bits you will need if you like Styv

 

[rotn50]

Top vid nick thanks for sharing mate, yeah its crap when ya ride with someone and there not into it as much, im glad now I got wakey and he likes WOT but my other mate I don't ride with much now as im always pulling up waiting and he had a bad habit of when in front of me he would just stop randomly checking his bike.

 

[Rodney68]

Top video Nick your bike looks sweet as and goes and sounds great mate.

 

[Styv_Loosekid_21]

Ay nick what oil you run in this motor and others? Heard motul 3000 as that's wat I've used over the years. Just want to know what you run..

Cheers

 

[nickv1980]

I ran it in on belray exl 10w40 and now I've switched to ipone 10.4

Sent from my HTC One M7

 

[K.Jansson]

Ay nick what oil you run in this motor and others? Heard motul 3000 as that's wat I've used over the years. Just want to know what you run..

Cheers

If you wanna stick with motul, the 5100 semi synt. is a pretty good oil. the 7100 full synt. is also good but is a little bit thinner, lower viscosity than the 5100 that might not be good in higher temperatures. Im running 5100 in my engines.

 

[nickv1980]

If you wanna stick with motul, the 5100 semi synt. is a pretty good oil. the 7100 full synt. is also good but is a little bit thinner, lower viscosity than the 5100 that might not be good in higher temperatures. Im running 5100 in my engines.

don't run full syn oil in these engines and don't run any thing syn until you run it in anyway

Dont ever use the 7100 but you can in fact run the 3000 full mineral for a few tanks of fuel over the run in period then switch to the 5100 as janson mentioned which is a semi syn it is okay to run Styv

Sent from my HTC One M7